Professional China Dyeing Silicone Oil - 68695 Silicone Softener (Hydrophilic, Smooth, Plump & Silky) – Innovative

Features & Benefits

1. Excellent hydrophilicity in cotton and cotton blends.
2. Imparts fabrics superior smooth, plump and silky hand feeling.
3. Similar to self-emulsifying property, which can ensure the stability of the bath. Can totally solve the safety problem, as roll banding and sticking to equipment, etc.
4. Keeps excellent stability under different pH range and temperature conditions.
5. Extremely low yellowing property. Suitable for white color and light color fabrics.

Typical Properties

Package

120kg plastic barrel, IBC tank & customized package available for selection

TIPS:

Chemical finishing processes

Chemical finishing can be defined as the use of chemicals to achieve a desired fabric property. Chemical finishing, also referred to as ‘wet’ finishing, includes processes that change the chemical composition of the fabrics that they are applied to. In other words, an elemental analysis of a fabric treated with a chemical finish will be different from the same analysis done prior to the finishing.

Typically chemical finishing takes place after coloration (dyeing or printing) but before fabrics are made into garments or other textile articles. However, many chemical finishes can also be successfully applied to yarns or garments.

Chemical finishes can be durable, i.e. undergo repeated launderings or dry cleanings without losing effectiveness, or non-durable, i.e. intended when only temporary properties are needed or when the finished textile typically is not washed or dry cleaned, for example some technical textiles. In nearly all cases, the chemical finish is a solution or emulsion of the active chemical in water. Use of organic solvents to apply chemical finishes is restricted to special applications owing to the expense and the real or possible toxicity and flammability of the solvents employed.

The actual method of finish application depends on the particular chemicals and fabrics involved and the machinery available. Chemicals that have strong affinities for fiber surfaces can be applied in batch processes by exhaustion in dyeing machines, usually after the dyeing process has been completed. Examples of these exhaust applied finishes include softeners, ultraviolet protection agents and some soil-release finishes. Chemicals that do not have an affinity for fibers are applied by a variety of continuous processes that involve either immersing the textile in a solution of the finishing chemical or applying the finishing solution to the fabric by some mechanical means.

After application of the chemical finish, the fabric must be dried and if necessary, the finish must be fixed to the fiber surface, usually by additional heating in a ‘curing’ step. A schematic diagram of a pad–dry–cure process is shown as below.